






Roast Validation System
IncludesCoffMeter A1CoffMeter M1CoffMeter W1Microbalance TiR2 ExtractParticle Analysis Coaster
What it does
CoffMeter M1
- ±0.2%
- Moisture precision
- ±1 g/L
- Density precision
- ≤2 s
- Test time
- 1–50%
- Moisture range
Moisture and density in two seconds
With standardized sample prep, you get moisture to ±0.2% and density to ±1 g/L in 2 seconds or less.
Every stage of the coffee
Measure green, roasted, parchment and dried cherries.
A full day of testing
10 hours of continuous use from a 2,500 mAh battery.
CoffMeter W1
- ±0.02 aw
- Accuracy
- 0.001 aw
- Resolution
- 2 min
- Test time
- 750 g
- Weight
The number that predicts shelf life
Below 0.60 aw, mold can't grow and green coffee stays sound for years. Above 0.70 aw, the lot is at risk. Moisture % alone can't tell you which side you're on.
Take it to the coffee
Load 6 to 8 g of beans, press start, and read the result in about 2 minutes, wherever the lot is.
Calibrate it yourself
Calibrate with a reusable saturated salt solution you mix yourself, and get firmware updates through CoffeeOS.
Microbalance Ti
- 3,000 g
- Capacity
- Live
- Flow rate
- 2,500 mAh
- Battery
As simple or detailed as you want
Brew with weight and time on the scale alone, or connect to CoffeeOS and record every pour with the Brew Recorder.
Made for hand brewing
Sized for pour-over and espresso, with weight, a timer, a countdown timer and live flow rate on the display.
A still reading on a busy bar
Vibration filtering keeps the number steady while you pour.
R2 Extract
- ±0.03%
- TDS accuracy
- ±0.02%
- TDS precision
- 0–30%
- TDS range
- 4 s
- Test time
Find your extraction
Measure TDS with R2 Extract and CoffeeOS works out your extraction yield, so you can dial in toward the flavor you want instead of guessing.
Accurate on every test
Each test runs a microcalibration against a reference material, and the aluminum sample dish spreads heat evenly so the reading stays stable.
Rinse it and carry on
IP67 water resistance. Rinse the dish under the tap and wipe it dry.
Particle Analysis Coaster
Particle analysis with your phone
Photograph your grounds on the coaster and use the Particle Analyzer in CoffeeOS to see your grind distribution.
Adjust your grind with a number
Use the distribution to change one grind step at a time and see what it did to extraction.
Where to start
It isn't as accurate as standardized testing equipment like Omni, but it shows you clearly how your grind changes.





